Download  Print this page

Advertisement

Set the network connection to use Internet services such as perform software upgrades.
Automatic Open Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Set
Network type
to
Wired
from the
2
Press the
Connect
button to start
– The
Connect
button is only enabled when the LAN cable is properly connected.
3
The network test screen appears and verifies the network connection.
When the connection has been verified, the
completed." message appears.
― If the connection process fails, check the LAN port connection.
― If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
Manual Open Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
Open Network Settings
page.
Open Network
Settings.
"Wired network and Internet connection
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are
displayed.
How to set up manually
1
Set
Network type
to
Wired
from the
2
Press the
Connect
button to start
– The
Connect
button is only enabled when the LAN cable is properly connected.
3
The network test screen appears and the verification process starts. Press Stop. The
verification process stops.
4
Select
IP Settings
on network connection screen. The
5
Select the field at the top, press E, and then set
the entry process for each field in the
― Setting
IP Settings
to
Enter manually
manually.
6
When done, select
OK
at the bottom of the page, and then press E. The network test
screen appears and the verification process starts.
7
When the connection has been verified, the
completed." message appears.
Open Network Settings
page.
Open Network
Settings.
IP Settings
screen appears.
IP Settings
to
Enter
manually. Repeat
IP
Address.
automatically changes
DNS Setting
"Wired network and Internet connection
to
Enter
86

Advertisement

Table of Contents

   Also See for Samsung OH75F

Comments to this Manuals

Symbols: 0
Latest comments: