Connecting the HDBase-T
― The appearance may differ depending on the product.
― Connecting parts may differ in different products.
― HDBase-T (Tx) transmits data from an external device to HDBase-T (Rx). Make sure to connect them directly using a LAN cable.
― Data transmission is not available if HDBase-T (Rx) is connected to HDBase-T (Tx) through a hub.
― HDBase-T works with unshielded twisted pair (UTP) or shielded twisted pair (STP) cables; but, to ensure CE compliance, STP cables and STP Connectors are required. Shielded cable and
connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance. It is recommended to use an STP cable to maximize
performance. Using a UTP cable or patch may decrease performance.
HDBT (LAN IN)