Table of Contents
Advertisement
Before connecting cables
― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
2
Silicone bar
Unfasten the screws, then remove the cover.
Remove the appropriate silicone bar for the
thickness of the cable to connect.
Different hole sizes and corresponding cable
thickness for each:
― 7 Ø hole x 1: Insert the 7 Ø cable
― 5.5 Ø hole x 6: Insert the 5.5 Ø cable
― 3 Ø hole x 2: Insert the 3 Ø cable
― 8.5 Ø hole x 1: Insert the 8.5 Ø cable
3
4
5
6
Insert and keep the removed silicone bar in
the marked area to ensure it is not lost.
Insert the appropriate cable into the hole
from which the silicone bar was removed.
The cable should be connected as shown.
Close the cover, then fasten the screws.
― After all the cables are connected, make
sure to close the cover and fasten the
screws to ensure it is water tight.
― Recommended torque :10 - 12 kgf.cm
32
Advertisement
Table of Contents
