Table of Contents
Advertisement
Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
DO NOT open the unit within five minutes after switching off.
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
◆ Note: Use only the color gel that can resist high temperature. ( ＞300 ℃ )
Caution:
There are no user serviceable parts inside the unit. Do not open the housing or attempt any
repairs yourself. In the unlikely event your unit may require service, please contact your nearest
dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. And make sure that the structure to
which you are attaching the unit is secure and is able to support a weight of 10 times of the
unit's weight. Also always use a safety cable that can hold 12 times of the weight of the unit
when installing the fixture.
The equipment must be fixed by the professionals. And it must be fixed at a place where is out of
the touch of people and has no one pass by or under it.
2. Technical Specifications
DMX Control: 2 Channel Mode (Dimming, Strobe)
Control Modes: DMX, Master/Slave
Lens Options: 5°，11°，14°，19°，26°，36°，50°or 70°
0% ~ 100% linear dimming
Variable Strobe Effects
3
Advertisement
Table of Contents
