Table of Contents
Advertisement
7.3.7. View connection state
Description: Viewing the crosspoint state of the device; showing the input port numbers
connected to the outputs.
Command {VC}
Response (ALL●<O01>●<O02>...<O08>)
Legend: O01 to O08 show the corresponding output's connection state. If value <O01>
equals 01 it means that output 1 is connected to input 1.
State letters:
Explanation: I1 input port is connected to the O1 output port, I2 is connected to O2, and
so on. O1 output port is muted, O2 is locked, O3 is muted and locked.
7.3.8. View mutes on all outputs
Description: View muted outputs in the device.
Command {VM}
Response (MUT●<O01_state>●...
Explanation: O1 and O3 output ports are muted.
7.3.9. Save preset
Description: Save current ties to a preset memory location.
Command {$<id>}
Response (SPR<id>)CrLf
Explanation: Current ties is saved to memory location 1.
ATTENTION!
The router saves the mute state of the outputs as well.
ATTENTION!
Lock states are not saved. Lock state is assigned to the physical output of the router.
Presets don't affect output locks.
Page 52 / 81
Format
CrLf
Letter
L
M
U
Output is locked and muted
Format
...●<O08_state>)CrLf
Format
{vc}
(ALL M01 L02 U03 04 05 06 07 08)
State
Output is locked
Output is muted
{vm}
(MUT 1 0 1 0 0 0 0 0)
{$1}
(SPR01)
Chapter 7. Programmers' reference
Example
Example
L01
M01
U01
Example
Example
Advertisement
Table of Contents
