Table of Contents
Advertisement
Input port properties window
Click on the number of the desired port in case of grid view or on the headline of the port in
case of tile view to open the port properties window. Signal status information and the most
important parameters are displayed. Input equalization, color range, and HDCP settings
are available from this menu. Frame detector, Lightware's diagnostic tool for debugging
purpose is also available on the panel.
You can customize the name of the port by Rename button. Factory default settings for
current input or all inputs can recalled by selecting Current input and All inputs buttons. By
pressing Switch this input to all outputs button current input port is directed to all outputs.
Frame detector
The ports can show detailed information
about the signal like blanking intervals
and active video resolution. This feature
is a good troubleshooter if compatibility
problems
installation. To access this function,
open the port properties window and
click on Frame detector button.
Lightware's Frame Detector function
works like a signal analyzer and makes
possible to determine the exact video
format that is present on the port, thus
helps to identify many problems. E.g.
actual timing parameters may differ from
the expected and this may cause some
displays to drop the picture.
Page 38 / 81
Input port properties window
occur
during
system
Chapter 6. Software control - Using Lightware Device Controller
Advertisement
Table of Contents
