Table of Contents
Advertisement
6.3.2. Tile view
The tile view is to display the input and output ports by tiles. Each tile means an input or
output port and additionally shows the most important port and signal information. Thus,
the user can check the status of many ports at the same time without clicking on a port or
opening port settings window.
1
2
1
2
3
4
Display modes
Three display modes are defined in Tile view for matrix switchers:
▪
▪
▪
Control buttons
Page 34 / 81
Input ports
Output ports
Selected port
Connected port(s)
View mode,
Input switch mode and
Output switch mode.
Mute or unmute
Mute
selected output
port(s)
Lock or unlock
Lock
selected output
port(s)
View mode
Activate View mode
Activate Input
Input switch
switch mode
Activate Output
Output switch
switch mode
Chapter 6. Software control - Using Lightware Device Controller
Each tile represents an input port.
Each tile represents an output port.
Last selected port is displayed with yellow background
on the port bar. Press the button to open the port settings
window.
Those ports are listed (with white background) on the port
bar, which are connected to the Selected port.
Parameters
Select All
Deselect All
Autotake
Take
3
4
Open port settings
window
Select all ports (only in
output switch mode)
Deselect all ports
(only in output switch
mode)
Toggle Autotake mode
ON/OFF
Execute crosspoint
changes in Take mode
Advertisement
Table of Contents
