Set Hdmi Output Port Parameters - Lightware MX8x8HDMI-PRO User Manual

Hide thumbs Also See for MX8x8HDMI-PRO:
Table of Contents

Advertisement

Identifier
The HDMI/DVI mode, the color space selection, the color range conversion, the PCM
subsampling, and the HDCP handling are set to automatic.

7.6.5. Set HDMI output port parameters

Description: HDMI output cards have various settings, which can be set with this command.
Every setting has an automatic mode (this is the default) when the system selects the
proper conversions based on the type of the video signal and the capabilities of the sink
device, but you are also able to force other conversions with this command.
If you send the first version of the command (with @SO) then the new settings will affect
only the <out> output port. The @AO version will affect all HDMI output ports regardless of
the value of the <out> field.
Command {:HDMISET#<out>@SO=<a>;
Response (STO#<out>=<INFO>;
The meanings of the <a>, <b>, <c>, <d>, and <e> fields are the same as the parameters
of <OUT_SET> legend described in section
Chapter 7. Programmers' reference
Parameter description
<a>
HDMI mode
<b>
Color space
<c>
Color range
<d>
PCM subsampling
<e>
HDCP handling
<f>
Reserved for future use.
Format
<b>;<c>;<d>;<e>;}
<VIDEO>;<AUDIO>;
<ADV_INFO>;<SINK_INFO>;
<OUT_SET>;)CrLf
Parameter values
A = The HDMI/DVI mode selection is automatic.
D = Always send DVI signal
H = Force 24bits/pixel HDMI signal
1 = Force 30bits/pixel HDMI deep color signal
2 = Force 36bits/pixel HDMI deep color signal
x = Don't modify this setting
A = Automatic color space selection
1 = Force RGB
2 = Force YUV444
3 = Force YUV422
x = Don't modify this setting
A = Handle color range conversion automatically
C = Compress the incoming color range to 16-235
E = Expand the incoming color range to full scale
x = Don't modify this setting
A = Automatic PCM subsampling
D = Disable PCM subsampling
2 = 2x PCM subsampling (it only affects 2ch PCM signals!)
4 = 4x PCM subsampling (it only affects 2ch PCM signals!)
x = Don't modify this setting
A = Handle HDCP automatically
1 = Always use HDCP
x = Don't modify this setting
 {:HDMISET#1@SO=H;2;x;x;x;}
 (STO1=G1100;OH2AAA;)
7.6.4
on page 65.
MX8x8HDMI-Pro series
User's manual
Example
Page 67 / 81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx8x8dvi-hdcp-pro

Table of Contents