Table of Contents
Advertisement
Step 5. Finding the device.
If the bootloader finds one or more routers their IP addresses, type and serial number are
listed in the tree view window. Press the Find button.
ATTENTION!
Note, that you must wait until all the devices on the network completely start up, before
pressing FIND button.
Step 6. Establishing the connection with the device.
Double click on the IP address, then click YES to establish connection with the matrix router.
It will take 10-15 seconds to get all information from the router.
ATTENTION!
The bootloader application will restart the router when it establishes the connection. All
connected DVI sources and monitors will act as if the router was powered down. The matrix
beeps when it is rebooted.
Chapter 8. Firmware upgrade
MX8x8HDMI-Pro series
User's manual
Page 73 / 81
Advertisement
Table of Contents
