Table of Contents
Advertisement
Installed cards (Card ID slots)
This submenu shows the hardware description strings of
the installed cards. You can view the installed cards by
pressing Up and Down buttons. The position is shown in the
top right corner. The possible values are:
▪
▪
▪
Firmware versions
It shows the firmware version numbers of the CPU, EDID,
web server, web content and the front panel control board.
Press the Up and Down buttons to view the desired firmware.
Factory resets
Here you are able to recover the original factory settings
if something went wrong. There are more factory reset
options that you can select:
IP reset
IO card reset
HDCP key reset
Disable HDCP on all
inputs
Enable HDCP on all
inputs
EDID resets
4.3.3. EDID mode
EDID mode is active when the EDID button is illuminated on the front panel. To enter or to
exit from this mode press and release the EDID button. There are three submenus in this
mode, use the Right, Left and Enter buttons to reach them.
EDID view
You can select an EDID with the UP and DOWN buttons and
view it's short name. The short name contains the three-
character long manufacturer code (so called PNPID), the
resolution and frame rate of the preferred timing, detailed
timing and the model name descriptor string. The following EDIDs can be selected:
O1 - O8
I1 - I8
M1 - M50
M51-M99
Chapter 4. Operation
MB: Motherboard,
I1: Input card slot,
O1: Output card slot.
It resets the IP settings to factory default, see in section
on page 78.
Resets all settings related to the IO cards except the EDID
routings.
Resets the internal HDCP key cache. It is useful when a source
device fails because of too many downstream connections.
Disables HDCP controls on all input ports.
Enables HDCP controls on all input ports.
Resets the EDID on all input ports to factory default, see in
section
The EDID of the currently attached or the last attached sink
device.
The emulated EDIDs of the input ports.
The stored Lightware EDIDs
49 user programmable memory slots.
10.2
on page 78.
MX8x8HDMI-Pro series
User's manual
CARD ID SLOT# MB
MX-DVI-MB8 SCH_1
Firmwares:
CPU
Ver:2.5.0
Factory resets..
10.2
EDID VIEW
O 1
SAM1920x1080@60.
Page 27 / 81
Advertisement
Table of Contents
