Table of Contents
Advertisement
7.2.7. Restart the device
Description: The device can be restarted without unplugging power.
Command {RST}
Response (CPU_RESET...)
Explanation: The device reboots.
7.2.8. Query health status
Description: Internal voltages and measured temperature values are shown.
Command {ST}
Response (STAT●<DESC>)CrLf
7.2.9. View current communication protocol
Description: Shows the RS-232, TCP/IP communication protocol.
Command {P_?}
Response (CURRENT●PROTOCOL●=●
Explanation: The current communication protocol is Lightware protocol.
Legend:
7.2.10. Set communication protocol
Description: Internal voltages and measured temperature values are shown.
Command {P_<x>}
Response (PROTOCOL●#<x>●
Explanation: The communication protocol is set to Lightware protocol.
7.2.11. Count HDCP keys
Description: If there is an HDCP source on any input of the matrix, the matrix can ask the
source whether it can handle <num> piece of sink devices.
Command {:HDCPTEST<in>@<num>}
Response (HDCPTEST=SUCCESS)CrLf
Explanation: The source on the 2nd input can handle 8 HDCP sink devices.
Chapter 7. Programmers' reference
Format
(MX8x8DVI FRAME Ready!)
Format
Format
#<x>)CrLf
No.
1
2
Format
SELECTED!)CrLf
Format
MX8x8HDMI-Pro series
Example
{RST}
(CPU_RESET...)
(MX8x8DVI FRAME Ready!)
Example
{ST}
(STAT 3.3V 5.0V 29V)
Example
{p_?}
(CONTROL PROTOCOL = #1)
Control protocol
Lightware protocol
P#2 protocol
Example
{p_1}
(PROTOCOL #1 SELECTED!)
Example
{:hdcptest2@8}
(HDCPTEST=SUCCESS)
User's manual
Page 49 / 81
Advertisement
Table of Contents
