Download Required Software; Default Usb Connection - Honeywell RP2B User Manual

Download Required Software

1. Create a new folder on your local computer named Drivers.
2. Go to the Technical Support Downloads Portal at
3. Go to:
4. When prompted, click on Open Honeywell Software Downloader.
5. Once the file has been downloaded, extract it to your Drivers folder.
6. Go to:
7. When prompted, click on Open Honeywell Software Downloader.
8. Once the file has been downloaded, extract it to your Drivers folder.
9. Open the Drivers folder and double-click each of the setup.exe files. Follow the

Default USB Connection

The default USB class is CDC Composite. On some systems (e.g., handheld
devices), you will have to change this USB class in order to connect. See
Connection
1. Connect the USB cable to the printer and to the USB port on the host system.
2. Power up your printer.
3. Your host computer should recognize the printer and begin adding the device
4. Select the appropriate RP printer model and follow the prompts to finish
4
hsmftp.honeywell.com.
Software
- Printers
- Mobile - Portable
- RP2 RP3 RP4
- Utility
to download the NETira® CT Printer Configuration Utility.
Software
- Printers
- Mobile - Portable
- RP2 RP3 RP4
- Drivers
- Printer
to download the Windows Printer Drivers (for DPL Input Mode).
prompts to install each piece of software.
on page 13 for further information.
driver. If the setup operation does not start, locate the Devices and Printers
section in the Control Panel and select Add a Printer.
installation.
https://
RP2/RP4 User Guide
USB