Bluetooth Connection; Bluetooth Settings - Honeywell RP2B User Manual

Bluetooth Connection

Follow your host PC or device instructions for pairing a new Bluetooth device. You
should see the printer as an available printer from your host. The default pass code
is 0000. Once connected and the connection is established, adjust the printer's

Bluetooth settings.

Bluetooth Settings
The printer is configured with default factory settings. To determine your printer's
configuration, print a configuration label (see
1. Open the NETira CT Printer Configuration Utility Tool and click on Tools -
2. Under Printer Information, select Bluetooth.
3. Change (or confirm) the following Bluetooth parameter settings:
4. After updating the New Value column, click the Send button to send this
5. Allow 30 seconds for the printer to reset.
RP2/RP4 User Guide
Query Printer Configuration (or press CTRL-q) to query the printer.
• Bondable: Yes
• Connectable: Yes
• Discoverable: Yes
• PassKey: Default 0000 (must match entry used on host computer)
change to the printer.
Print Configuration Label).
17