Working In The Live Interface - Honeywell Performance Series User Manual

Working in the Live Interface

The toolbar in the upper right corner of the screen provides quick access to commonly used
live monitoring controls
start recording live video.
(Figure
Figure 2-5 Live Interface Controls Toolbar
Table 2-2 Live Interface Controls
Icon Control
Digital Zoom
Snapshot
Triple Snap
Record
Easy Focus
Logging In and Viewing Live Video | 23
2-5). You can zoom in on a specific area, take a snapshot, or
Description
While viewing live video, click
left mouse button to zoom in on a specific area.
Right-click the mouse to return to the previous
magnification.
Click to take a snapshot of the live stream. The snapshot
is saved to the location specified in Setup > Camera >
Video > Path > Live Snapshot.
Click to take three snapshots of the live stream in quick
succession (one per second). The snapshots are saved
to the location specified in Setup > Camera > Video >
Path > Live Snapshot.
Click to start or stop recording the live stream. The
recorded video is saved to the location specified in
Setup > Camera > Video > Path > Live Record.
Displays the current video definition (AF Peak) and
target video definition (AF Max).
For auto focus to work, the AF Peak and AF Max values
must be close together. If the values are far apart, the
camera must be re-aimed or focused manually.
and hold down the
800-23288 - A - 07/2017