Ferm BSM1021 Original Instructions Manual page 4

BELT SANDER 950W
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2-3
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Machine data
2. Safety instructions
3. Operation
4. Service and maintenance
1. MACHINE DATA
Technical specifications
Voltage
Frequency
Power input
No load sander paper speed
Sanding belt size
Sanding pad size
Weight
Lpa (Sound pressure)
Lwa (Sound power level)
Vibration rear handle
Vibration front handle
Vibration level
The vibration emission level stated in this
4
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Product information
Fig. A + B
The belt sander is the perfect tool to sand wood
and to grind iron, plastic or similar materials.
The belt sander must be used for the rough work,
for the normal sanding work an orbital sander
must be used.
1. Rear handle
2. Front handle
3. Front belt roller
4. Clamping lever
5. Direction indicator
6. Speed control
7. On/off switch
8. Blocking switch
9. Dust collection opening
10. Dust bag
230 V~
11. Drive belt cover
50 Hz
12. Adjusting knob aligning sanding belt
950 W
13. Sanding belt
220-350 m/min
14. Mounting bracket holes
76x533 mm
76x135 mm
Contents of the package
3.55 kg
1 Belt sander
91.1+3 dB(A)
1 Sanding belts
102.1+3 dB(A)
1 Dust collection bag
3.934 m/s
2
K=1.5 m/s
2
1 Instruction manual
3.507 m/s
2
1 Safety instructions
K=1.5 m/s
2
1 Guarantee card
Check the machine, loose parts and accessories
for transport damage.