List Of Parameters - 2N Access Unit Configuration Manual

List of Parameters

Position Enabled – enable this user position.
Name – enter the user name for the selected user position. This parameter is
optional and helps you find items in the user list more easily.
E - mail – enter the user E-mail to which information on missed or successful
calls can be sent. Refer to the E-Mail subsection for more details.
Authentication mode
valid user card and then enter one of the switch activating codes (within ten
seconds after tapping) to activate the switch in this mode.
Each user can be assigned a private switch activation code. The user switch codes can
be arbitrarily combined with the universal switch codes defined in the Hardware /
Switches menu. If the codes are identical with the codes already defined in the
intercom configuration, the
Code – set a private user switch activation code: up to 16 characters including
digits 0–9 only.
Time Profile – assign a time profile to the switch code to define the code validity.
If the time profile is inactive, the switch will not be activated by the code.
2N TELEKOMUNIKACE a.s., www.2n.cz
- set card + numeric code authentication for a user: apply a
mark will appear at the colliding codes.
23/84