Express Wizard For Basic Settings - 2N Access Unit Configuration Manual

Hide thumbs Also See for Access Unit:

Table of Contents

2. Express Wizard for Basic

Settings

LAN Connection Setting

You have to know the IP address to connect to the 2N® Access Unit configuration

interface successfully. Automatic IP address retrieval from the DHCP server is set by

default in the

server configured to assign IP addresses to all new devices is available, the 2N

Access Unit

will obtain an IP address from the DHCP server. The

address can be found in the DHCP server status (according to the MAC address given

on the production plate), or will be communicated to you by the 2N

voice function; refer to the Installation Manual.

If there is no DHCP server in your LAN, use the

the static IP address mode; refer to the respective Installation Manual. Your unit

address will then be

necessary.

Now enter the IP address into your favourite browser. We recommend you to use the

latest Chrome, Firefox or Internet Explorer (Edge) versions as

fully compatible with earlier browser versions.

Use the name "admin" and password "2n" (i.e. default reset password) for your first

password upon your first login; refer to the Password parameter in the Services / Web

Server

menu. Remember the password well or put it down. It is because if you forget

the password, you will have to reset the intercom to default values (refer to the

respective Installation Manual) thus losing all your current configuration changes.

2N TELEKOMUNIKACE a.s., www.2n.cz

Access Unit

. Thus, if connected to a network in which a DHCP

192.168.1.100

. Use it for the first login and then change it if

Access Unit

RESET button to set

Access Unit

is not

6/84

Table of Contents