I/O Module Configuration; Wiegand Module Configuration - 2N Access Unit Configuration Manual

I/O Module Configuration

Module name – set the module name for input/output specification in the
SetOutput, GetInput and InputChanged objects in the 2N® Helios IP Automation
settings.

Wiegand Module Configuration

The Wiegand module is equipped with the input and output Wiegand interfaces,
which are mutually independent, have separate settings and can receive and send
codes at the same time. The Wiegand input helps you connect such equipment as
RFID card readers, biometric readers and so on. With the Wiegand output, you can
®
connect the 2N Access Unit
send IDs of the RFID cards tapped on the RFID reader or codes received on any
Wiegand input). The Wiegand module is also equipped with one logical input and one
logical output, which can be controlled via
2N TELEKOMUNIKACE a.s., www.2n.cz
to the security system in your building, for example (to
®
2N Helios IP Automation .
46/84