Din Rear-Mount; Installation Using The Screw Holes On The Side Of The Unit - Pioneer DVH-P5650MP Installation Manual

Hide thumbs Also See for DVH-P5650MP:

Table of Contents

Installation

DIN Rear-mount

1. Remove the frame.

2. Fastening the unit to the factory radio mounting bracket.

Frame

Factory radio

mounting bracket

Insert the release pin into the hole in the

bottom of the frame and pull out to remove

the frame. (When reattaching the frame,

point the side with a groove downwards and

attach it.)

Select a position where the screw holes of the

bracket and the screw holes of the head unit

become aligned (are fitted), and tighten the

screws at 2 places on each side. Use either

truss screws (5 × 8 mm) or flush surface screws

(5 × 9 mm), depending on the shape of the

screw holes in the bracket.

Screw

Dashboard or Console

Table of Contents