Select Ensemble In Your Daw; Select Ensemble In Logic Pro X; Select Ensemble In Pro Tools - Apogee Ensemble Thunderbolt User Manual

Select Ensemble in your DAW

Most professional applications have their own audio preferences that are separate from the Mac System
Preferences� Basic steps for setting up Ensemble are provided� For more detail on this topic, refer to the
documentation that comes with your recording program�

Select Ensemble in Logic Pro X

1� Go to Logic Pro X > Preferences > Audio�
2� In the Devices Tab, select "Ensemble" in the
Output and Input Device drop-down boxes�
"Apogee Thunderbolt" when in Multi-Unit Mode
3� Start by setting the I/O Buffer Size to "64
Samples"� This setting may need to be adjusted
based on your computer's performance�
4� Select "Apply Changes" and close the
Preferences window�
Apogee Ensemble Thunderbolt | User's Guide

Select Ensemble in Pro Tools

1� Go to Setup > Playback Engine�
2� In the Playback Engine drop-down box, select
"Ensemble"�
"Apogee Thunderbolt" when in Multi-Unit Mode
3� Start by setting the H/W Buffer Size to "64
Samples"� This setting may need to be adjusted
based on your computer's performance�
4� Select OK�
21