Table of Contents
Advertisement
Ensemble Thunderbolt Panel Tour
Front Panel
1. Guitar I/O (see
page
a� Inputs ch 11/12: Connect high
impedance (Hi-Z) instruments
such as guitar or bass�
b� Outputs ch 11/12: Instrument
level outputs for connecting
directly to a guitar amplifier or
Hi-Z pedal effects/processor.
2. Input Select Buttons:
a� Push to select an input
b� Push again to view the
Input Settings screen
3. Input Controller Knob:
a� Turn to adjust gain� When
viewing input settings, turn to
move to the next parameter�
b� Push to select the next input�
When viewing input settings,
push to change a parameter's
setting�
4. Output Controller Knob:
a� Turn to adjust the volume of
your monitor speakers�
b� Push to toggle your monitor
speakers mute On/Off.
25):
Apogee Ensemble Thunderbolt | User's Guide
5. Built-in Mic (see
a� The built-in mic can be recorded,
or used for the talkback function�
b� Is a mono source� The same
signal is duplicated on channels
9 and 10�
6. Assignable Buttons:
Programmed from the Apogee Control software's
Remote & Front Panel Assignments Window (see
page
51)� Factory default settings are:
a� Talkback - must hold button
down to use (momentary)�
b� Clear Meters�
c� Toggle G1/G2 output source
between "Thru" and "From
Software"�
d� Toggle Mute function between Monitor Out
and Headphones outputs�
7. Headphones 1&2 Controller Knobs:
a� Turn to adjust headphone
output volume�
b� Push to toggle mute on/off.
8. Power Button:
7
page
32):
Hide quick links:
Advertisement
Table of Contents
