Main Features; Analog Audio Inputs; Guitar Inputs; Channels 1 - 4 Features - Apogee Ensemble Thunderbolt User Manual

Main Features

Analog Audio Inputs

Ensemble's 12 analog audio inputs provide a multitude of connectors and options coupled with Apogee's
dynamically optimized preamps and premium circuit design that provide for all the interconnections you need
with your external gear�

Guitar Inputs

See the Guitar I/O section on

Channels 1 - 4 Features

Combi Jacks

• When using the 1/4" input, the source must be set to "Inst".
• When using the XLR input, the source may be "Mic", "+4dBu", or "-10dBV".
When Input Source is set to:
Mic
- The XLR input is sent to the microphone preamp circuit�
Inst
- The 1/4" input is sent through a Hi-Z to Low-Z conversion circuit, then the microphone preamp circuit�
+4dBu - The XLR input bypasses the microphone preamp circuit and sent to the A/D converter�
-10dBV - The XLR input is converted to +4dBu, bypasses the microphone preamp, and sent to the A/D
converter�
page 25�
Rear Panel inputs 1-4 feature a combination (combi) input connector that is able
to receive an XLR or 1/4" plug through the same jack� Set the input source via
Ensemble's front panel controls
(page 46) according to the input connector being used�
Apogee Ensemble Thunderbolt | User's Guide
(page 17), or from the Apogee Control software
30