Control - Hardware Remote (Optional) - Apogee Ensemble Thunderbolt User Manual

Control - Hardware Remote (Optional)

This programmable control surface is used to adjust settings and parameters of your Ensemble Thunderbolt�
For a full list of programmable features, see the Control Remote Assignments section of the Apogee Control
Software section on page
To Computer - Micro USB port for connecting to your computer�
Use a standard USB-A to USB-MICRO-B cable�
Display Indicators - Shows currently selected input, the input type, as well
as the output selection�
Assignable Buttons - Performs the assigned function� Any function can be
assigned to any button via the Apogee Control software
The factory default assignments are:
1 - Clear Meters
2 - Dim Speakers
3 - Toggle Speaker Sets
4 - Toggle Main Source
Microphone button
- One push focuses the knob on adjusting the input gain level�
- Multiple presses cycles through the input channels�
Headphone button
- One push focuses the knob on adjusting the headphones volume level�
- Multiple presses cycles through the headphone outputs�
Speaker button
- Focuses the knob on adjusting the speaker volume level�
Control Knob
- Turn to adjust settings�
- Push down to mute all outputs�
- The push button can be assigned to another function via the Apogee Control software
51�
A - Launch Apogee Control
B - Mono Speakers
C - Set Main Out to Reference
D - Momentary Talkback
Apogee Ensemble Thunderbolt | User's Guide
(page 51)�
10
(page 51)�