Table of Contents
Advertisement
Out View
The Out View of the Primary Window shows the settings and level meters for the analog and digital outputs�
1.
Hardware Output Label - Indicates the analog or digital hardware output�
2.
Output Channel Level Meter - Shows the digital signal level before the D/A conversion�
3.
Output Icon - Indicates which output's volume level is controlled by the Main Output volume control, and which are
fixed-volume line-level outputs.
4.
Analog Level - Set the output level for each analog channel� Match this level with the analog gear to which Ensemble is
connected�
Choose +4dBu when connecting to professional line level equipment�
•
Choose -10dBV when connecting to "semi-pro", hi-fi, or consumer equipment.
•
5.
Output Trim Control - Use to adjust the analog output stage for precise calibration between speakers (see
•
Option+click to reset to 0� Command+click to reset all channels to 0�
6.
Hardware Output Source - Set the signal source for the pair of hardware analog or digital outputs�
Choose a Playback source to route audio directly from your DAW�
•
Choose a Mixer source to route audio from a Symphony Control mixer�
•
Choose a Hardware Input source to route audio directly from an I/O Module input�
•
Apogee Ensemble Thunderbolt | User's Guide
49
page
37)�
Hide quick links:
Advertisement
Table of Contents
