Configuring Your Daw; Apple Logic Pro - Apogee Boom User Manual

Configuring Your DAW

Find below detailed information to configure Boomwith popular DAWs:

Apple Logic Pro

To configure Apple Logic Pro to use Boom:
1. In the Logic Pro menu bar, choose Logic Pro >
Preferences > Audio in the menu bar, then click the
Device tab.
2. Check the Core Audio checkbox; set Output Device and
Input Device to Boom.
3. Set Buffer Size to 128 Samples to start, adjust for lower
latency or more plugin power.
4. Click Apply.
To configure Logic Pro for Direct or Software Monitoring Workflow:
1. In the Logic Preferences > Audio window, click the
General tab
● Check Software Monitoring for, uh, Software
monitoring.
● Uncheck Software Monitoring for Direct monitoring.
2. In Apogee Control 2, set Mixer View in the System
Settings column.
● Set to Off for Software monitoring.
● Set to On for Direct monitoring.
3. In Apogee Control 2, set Main and Headphone Sources.
● Set to Playback 1-2 for Software monitoring.
● Set to Mixer for Direct monitoring.
To access Boom inputs & outputs in Logic Pro:
1. From the Logic Pro menu bar, choose Mix > I/O Labels.
2. Choose the Provided by Driver labels by clicking on the first label, dragging your mouse down
until all Boom labels are highlighted, then unclick.
3. Close the I/O labels window.
4. Select Boom inputs and outputs in any Logic Pro Channel Strip.
33
Apogee Boom User's Guide