Table of Contents
Advertisement
Available languages
Available languages
16
3.11 DMX MODE
To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the Address and press the ENTER key.
• Press the arrow keys to select the desired value (001-512).
• Press the ENTER key to confirm the setting.
• Press the LEFT button repeatedly to exit the menu and save changes.
3.12 DMX CONFIGURATION
The LUMA700 has 5 DMX channel configurations which can be accessed from the control panel.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select DMX Mode and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Mode and press ENTER to confirm your
choice.
• Use the UP/DOWN button to select the desired DMX channel configuration (Standard, Extended, Basic-8bit,
Basic-16bit, User), then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
The tables on page 19 show the mode of operation and their values DMX.
The unit is equipped with 3/5-pole XLR connections.
Edit User
The Edit User, in the same menu, allows you to create a profile of personalized functions. You can change
the parameters of the various functions (Control, Pan, Tilt, etc.). Once you've created your custom profile,
you can use it by selecting the USER mode as described above.
3.13 DMX ADDRESSING
For operation via light control unit with DMX512 protocol, is sufficient connect the controller to LUMA700.
To able to operate the LUMA700 with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan-
nel, adjust the start address 33 on the LUMA700. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX channels
(example)
19
33
21
33
28
33
29
33
LUMA700
DMX Address
Next possible start
occupied
address for unit No. 1
33-52
33-54
33-61
33-62
Next possible start
address for unit No. 2
53
55
62
63
Next possible start
address for unit No. 3
72
76
90
92
91
97
118
121
Advertisement
Chapters
Table of Contents
