Using The Menu - Prolight LUMA700 User Manual

10

3.3 USING THE MENU

1. Press the ENTER button to access the main menu.
2. Use the UP/DOWN button to select the menu to be used:
• Connect;
• Setup;
• Advanced;
• Information;
• Stand alone;
3. Press ENTER to display the first item in the selected menu.
4. Use the UP/DOWN button to select the menu items.
NOTE - The display can be in one of two conditions: rest status and setting status. When it is in the rest sta-
tus, the display shows the projector's DMX address. During menu setting status, after a wait time without
any key having been pressed, the display automatically returns to rest status.
It should be noted than when this condition occurs, any possible value that has been modified but not yet
confirmed with the ENTER button will be cancelled.
Reversal of the display
To activate this function, hold simultaneously for 3 seconds UP and DOWN buttons while the display is in
the rest mode. This status will be memorised and maintained even for the next time it will be switched on.
To return to the initial state, repeat the operation all over again.
LUMA700
Fig.5 - Reversal of the display