Functions And Settings; Operation; Basic - Prolight LUMA700 User Manual

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their home position. Shortly after that the LUMA700 is ready for operation. To switch
off, disconnect the mains plug from the socket. For a more convenient operation it is recommended to
connect the unit to a socket which can be switched on and off via light switch.

3.2 BASIC

The control panel of LUMA700 has a display and 5 buttons for the complete programming and manage-
ment of the projector menu (fig.4).
UP
Increases the value Decreases the value
displayed or passes displayed or passes
to the previous item to the next item in
in a menu the menu
CONNECT
LUMA700
DOWN LEFT
Return to the top
level
SETUP ADVANCED
Battery
RIGHT
Commute from Confirms the
units, tens, hundred displayed value,
in the menu or activates the
displayed function,
or enters the
successive menu
INFORMATION
Fig.4 - Functions of the buttons and display icons
ENTER BATTERY
Used to activate the
backup battery. It
allows to switching
display interface
without main power
STAND ALONE
9