Meridian 3
44
10. Mechanical Instructions
Step 1: Remove the stand base ASSY
1. Place the monitor face on a safe surface, and
remove the COVER HINGE.
2. Remove the four screws to remove the stand base
ASSY from the monitor.
Step 2: Remove the rear cover
1. Remove the one screw and open the latches along
the red arrowhead direction as the picture to open
other latches.
2. Backward the rear cover.
3. Disconnect the cables to remove the rear cover and
remove the one screw to remove headphone jack
board.
247E3LH