• Please use approved power cord provided by Philips at all times. If The Philips guarantee applies provided your power cord is missing, please the product is handled properly for contact your local service center.
Page 4
1. Important • If foreign substance or water gets in screen for a constant period of time by : your monitor, please turn the power off immediately and disconnect the • Looking at something varying power cord. Then, remove the for- distances after a long period eign substance or water, and send it focusing on the screen.
1. Important Service 1.2 Notational Descriptions • The casing cover should be opened The following subsections describe only by qualified service personnel. notational conventions used in this • If there is any need for any docu- document. ment for repair or integration, please contact with your local ser- Notes, Cautions and Warnings vice center.
Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- This marking on the product or on back initiatives and recycling programs...
Top Victory Investments Ltd. or one of its a liates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor 243E9QS Front view product description AC/DC power input VGA input DVI input Press to switch power on. Kensington anti-theft lock Press more than 3 seconds to switch power off. 243E9QHS/247E9QHS Access the OSD menu.
Page 9
On-Screen Display. You can use On-Screen Display (OSD) is a feature in this as a reference when you want to all Philips LCD monitors. It allows an end work your way around the different user to adjust screen performance or adjustments later on.
Page 10
2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 1920×1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920×1080@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 4. Use a screwdriver to remove the 2.3 Remove the Base Assembly screws on the arm, and then detach for VESA Mounting the arm/stand from the monitor. Remove the Base Stand Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury.
Whether you're working with text applications, displaying images 243E9QS or watching a video, Philips SmartImage 1. Toggle to the left to launch the delivers great optimized monitor SmartImage on screen display. performance.
Page 13
• FPS: For playing FPS (First Person time. Developed for wellbeing, Shooters) games. Improves dark Philips LowBlue Mode setting uses a theme black level details. smart software technology to reduce harmful shortwave blue light.
Developed for wellbeing, Philips LowBlue Mode setting uses a Why do I need it? smart software technology to reduce You want the very best visual clarity harmful shortwave blue light.
5. Technical Specifications 5. Technical Specifications Picture/Display 243E9QS / 243E9QHS: VA Monitor Panel Type 247E9QHS: IPS technology Backlight W-LED system 243E9QS / 243E9QHS: 23.6” W (59.9 cm) Panel Size 247E9QHS: 23.8” W (60.5 cm) Aspect Ratio 16:9 243E9QS / 243E9QHS: 0.272 x 0.272 mm Pixel Pitch 247E9QHS: 0.275 x 0.275 mm SmartContrast...
Page 17
5. Technical Specifications 243E9QS / 243E9QHS Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz Normal Operation 24.2 W (typ.) 24.3 W (typ.) 24.4 W (typ.) Sleep (Standby) <0.5 W (typ.) <0.5 W (typ.)
Page 18
500 to 1060hPa (Non-operation) Environmental ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color White Finish Glossy Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Other combinations Pixel Defect Policy of lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 22
A red or blue bright dot must be the warranty period, a TFT Monitor more than 50 percent brighter than panel in a Philips flat panel monitor must have pixel or sub pixel defects neighboring dots while a green exceeding the tolerances listed in the bright dot is 30 percent brighter than following tables.
Page 23
7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >10mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Disconnect the monitor from mains • First, ensure that the power button power source immediately for safety on the front of the monitor is in the • Contact with Philips customer OFF position, then press it to the service representative immediately. ON position.
Page 26
Service contact information listed in may cause "burn in", also known as Important information manual and "after-imaging " or "ghost imaging", contact Philips customer service on your screen. "Burn-in", "after- representative. imaging", or "ghost imaging" is a * Functionality different according to well-known phenomenon in LCD display.
When handling the disconnect your old monitor and monitor, make sure that there is reconnect your Philips LCD monitor. no pressure or force applied to the panel surface side. This may • Turn on your monitor and then turn affect your warranty conditions.
Page 28
Q9: Can I connect my LCD monitor to sharp text, and is displaying jagged any PC, workstation or Mac? characters? Ans.: Yes. All Philips LCD monitors are Ans.: Your LCD monitor works fully compatible with standard best at its native resolution PCs, Macs and workstations.
Page 29
8. Troubleshooting & FAQs Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
Page 30
Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.
Need help?
Do you have a question about the E line 243E9 and is the answer not in the manual?
Questions and answers