Philips 247E3LHSU2/00 Service Manual page 86

Meridian 3
86
5. Color Temp confirmation
Connect the signal to the monitor, the monitor displays white-picture, use CA-210 to measure the Color Temp of the
screen center and select the OSD to make sure whether the Color Temps accord with the SPEC.
6. How to enter into the factory mode:
1. Connect the video source to monitor and AC on.
2. The way to factory menu: Press
screen lights, release the two buttons and press the "MENU" again, the picture will appear on the top left corner.
3. Select the "Factory" and press the "MENU" button to enter the factory mode. Take 227E3L for example:
CIE coordinates 9300K
x 0.283±0.02
y 0.297±0.02
and
6500K/sRGB
0.313±0.02 0.313±0.02
0.329±0.02 0.329±0.02
buttons at the same time, power on the monitor. When the
sRGB