Philips 247E3LHSU2/00 Service Manual page 106

106 Meridian 3
White connector thumb-operated jackscrews with transplant pin protective cover.
Pin Assignment:
Timing requirement
Factory Preset mode definition:
1. Perfect FOS while presenting those timings.
2. Will specify those timing in User's Manual
Preset mode definition:
1. Need to support those timings.
2. Perfect FOS after auto adjustment.
User mode
1. Can save those timing that not in Preset mode and can be showed (not over scaler or
Panel spec.)
2. It needs to reserve the 10 timings space in memory size.
i.
Factory preset modes
Preset modes
User modes
1. Factory preset modes and preset modes are defined in the enclosed timing table file
2. Video timing mode (internal firmware support) ,
Pin No.
1 TMDS Data2+
2 TMDS Data2 Shield
3 TMDS Data2–
4 TMDS Data1+
5 TMDS Data1 Shield
6 TMDS Data1–
7 TMDS Data0+
8 TMDS Data0 Shield
9 TMDS Data0–
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock–
13 CEC
Reserved (HDMI 1.0-1.3c), HEC Data-
14
(Optional, HDMI 1.4+ with Ethernet)
15 SCL (I²C Serial Clock for DDC)
16 SDA (I²C Serial Data Line for DDC)
17 DDC/CEC/HEC Ground
18 +5 V Power (max 50 mA)
Hot Plug Detect (All versions) and HEC
19 Data+ (Optional, HDMI 1.4+ with
Ethernet)
Mode storing capacity
: 15
: 41
: 10
Timing pixel clock over H/W limitation do not support.
VGA Video timimg : interlace modes do not support.
60Hz: 480p/720p/1080i/1080p
50Hz: 576p/720p/1080i/1080p
Description