Philips 247E3LHSU2/00 Service Manual page 107

OSD/Keypad functions
ITEM
1 OSD/keypad definition
2 OSD Translation
3 OSD TREE
4 Power On logo
5 Audio Selection
Horizontal scanning
Sync polarity
Scanning frequency
PS: Item 3.4 and 3.5, as far as possible to be display (another Horizontal and Vertical)
Vertical scanning
Sync polarity
Scanning frequency
Power input connection
Power cord length
Power cord type
Power management
The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode H-SYNC V-SYNC
Power-On On
Standby
(Sleep
Off
mode)
DC Power Off
PS: SmartImage Economy mode: < EPA5.0 spec. (Brightness=20%)
Stand-alone – On:
Isolate video and audio control
input
Stand-alone – Off:
Integrate video and audio control
input
Mute – On: Turn off audio
Mute – Off: Turn on audio
: Positive or Negative
: 30 – 83 K Hz
: Positive or Negative
: 56 - 76 Hz
: please refer to M3 cable bundle summary file
: 3 leads power cord with protective earth plug.
Video PWR-Cons.
<30W (typ.)
On Active
< 58W(max.)
Off Blanked
N/A
Blinking white LED
< 0.5W
Period 3ec on, 3sec off
< 0.3W
Meridian 3 107
Reset -
No: Exit
Yes: Auto adjustment for
displaying timing mode and
recall factory preset
English, French, German,
Spanish, Italian, Russian,
Simplified Chinese,
Portuguese, Turkish (9)
Power On Logo: Power On
Show up Philips logo 3
seconds
Change to input signal.
This picture is reference only.
The official drawing will send
out by PM.
Indication Rec. time
White LED
Note 1
Note 2
LED Off
--