Philips 247E3LHSU2/00 Service Manual page 64

Meridian 3
64
13.5 Check the SN
1. Connect the video source and power on monitor.
2. Press the "MENU" button to enter the user menu and select "Input", you can check the 14 digital SN. Take
227E3L for example:
3. If this SN number is the same as what we had written by EDID tool, the EDID and SN writing is completed finally.
13.6 Troubleshooting
1. Can't write error.
2. Try below few ways to cure can't write errors!
(1) AC on the monitor and turn on it.(Restart the monitor)
(2) Take apart the monitor and connect the 7pin of EEPROM to GND to diable write protection then write EDID
one by one.
(3) Set the Burn in on last to try again.