Understanding The Primary Flight Controls - BNF Blade mCP Instruction Manual

Aileron
Aileron left
Collective Pitch
Collective pitch up
Motor
Place the helicopter outdoors on a clean, fl at and level
surface (concrete or asphalt) free of obstructions. Always
stay clear of moving rotor blades.
CAUTION: Keep pets and other animals away
from the helicopter. Animals may injure themselves
if they attack or run toward the helicopter.
1. Both motors beep 3 times when the helicopter's control
unit arms properly. Before you continue, confi rm that
throttle is at full low position.

Understanding the Primary Flight Controls

If you are not familiar with the controls of the mCP S, take a few minutes to familiarize yourself with them before
attempting your fi rst fl ight.
Collective
Throttle up
Rudder
Rudder left
EN
Rear View
Left Side View
Left Side View
Climb
Top View
Nose Yaws Left
Aileron right
Collective pitch down
2. Turn Throttle Hold OFF.
WARNING: Stay at least 30 feet (10 meters) away
from the helicopter when the motor is running. Do
not attempt to fl y the helicopter at this time.
3. Slowly increase the throttle until the blades begin to
spin. The main blades should spin clockwise when
viewing the helicopter from the top. The tail rotor
blades should spin counterclockwise when viewing the
helicopter from the right side.
Throttle down
Rudder right
10
Rear View
Left Side View
Left Side View
Descend
Top View
Nose Yaws Right