Telemetry: Rx-Batt; Alert Set - FUTABA 14SG Instruction Manual

TELEMETRY : Rx-BATT.
In this screen, the battery voltage of a receiver is
displayed.
If it becomes higher or lower than the setting an
alarm and/or vibration will alert you.
R T N
H O M E / E X I T
RETURN

Alert set

*When the RTN button is touched for one second, the rate is
reset to the initial value.
92 <Functions of Linkage Menu>
*It cannot be used in FASST mode and S-FHSS mode.
*Only receiver voltage and EXT voltage can be used in
FASSTest12CH mode.
*The FASSTest14CH mode can use all the telemetry functions.
<SensorTouch™>
"Vibes" type
If the following types are selected, the transmitter will
vibrate during the warning.
TYPE 1
TYPE 2
TYPE 3
TYPE 4