THR HOLD
This function sets the throttle cut position for
auto rotation. The throttle servo operating speed
R T N
H O M E / E X I T
RETURN
Setting method
reset to the initial value.)
154
<Functions of Model Menu (Helicopter Functions)>
Note: Initially, this setting does not assign the
throttle hold switch. Prior to adjusting the
parameters for the throttle hold, we suggest
designating a throttle hold switch. To do so,
access the Condition menu within the Model
menu options.
<SensorTouch™>
reset to the initial value.)
Operation precautions
Warning
When actually starting the engine and flying,
always set the idle up condition switch to OFF
and start the engine at idle.