Trim Offset Rate Adjustment; Auto Switch Selection - FUTABA 14SG Instruction Manual

Setting method
the RTN button to switch to the data input
touch sensor.
*The display blinks.
Touch the RTN button to activate the
When setting a switch, move the cursor to
the switch item and touch the RTN button
to access the selection screen. Select the
*For a description of the switch selection method, see the
description at the back of this manual.
Move the cursor to the aileron, flap or
elevator rate item and touch the RTN button
rate independently by scrolling the touch
sensor.
*When the RTN button is touched for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
and touch the RTN button to switch to the
by scrolling the touch sensor.
134 <Model Menu (Airplane/Glider Functions)>
FLP 3
(Brake Flap) (Brake Flap)
FLP 1
(Camber Flap)
AIL1
(Main Aileron)
AIL 3
(Chip Aileron)
V-TAIL
ELEVATOR
ELEVATOR 2
*When the RTN button is touched for one second, the servo
operation position is reset to the initial value.)
and return to the cursor mode.
When setting a cut switch, move the cursor
button to access the selection screen. Select
*For a description of the switch selection method, see the
description at the back of this manual.
Move the cursor to the aileron, flap or
elevator speed item and touch the RTN
button to switch to the data input mode.
*When the RTN button is touched for one second, the rate is
reset to the initial value.)
Touch the RTN button to activate the
function and return to the cursor mode.
When selecting an auto switch, move the
RTN button to access the selection screen.
Select the switch and set its ON direction.
*For a description of the switch selection method, see the
description at the back of this manual.
FLP 4
FLP 2
(Camber Flap)
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
AILVATOR
ELEVATOR
ELEVATOR 2