Thr Delay Function; Operation Speed (Delay) Setting - FUTABA 14SG Instruction Manual

THR DELAY
THR-DELAY function is used to slow the
response of the throttle stick to simulate the slow
response of a turbine engine, etc.
*This function is the same as THR of servo speed. If it sets up
in great numbers, it overlaps and a THR servo becomes late
further. Please do not let me overlap. Use either.
and access the setup screen shown
below by touching the RTN button.
and return to the Model
menu by touching the
R T N b u t t o n . O r t h e
H O M E / E X I T b u t t o n i s
pushed.
RETURN
Setting method
touch the RTN button to switch to the data
input mode.
sensor.
*When the RTN button is touched for one second, the rate is
reset to the initial value.)
Touch the RTN button to activate the
function and return to the cursor mode.
<SensorTouch™>
<Model Menu (Airplane/Glider Functions)>
Scrolling
119