Flap Set.; Flap Up/Down Adjustment; Activate The Brake Flp To Camber Flp Mixing - FUTABA 14SG Instruction Manual

FLAP SET.

FLP1/2, brake flaps: FLP3/4) can be adjusted
independently for each servo according to the
wing type.
offset
The camber flaps of a 4-flap model can
be mixed with the brake flaps. (BRKFLP to
CMBFLP)
screen shown below by touching the RTN button.
and return to the Model
menu by touching the
R T N b u t t o n . O r t h e
H O M E / E X I T b u t t o n i s
pushed.
RETURN
Setting method
Down item according to the wing type and
touch the RTN button to switch to the data
by scrolling the touch sensor.
*When the RTN button is touched for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
touch the RTN button to switch to the data
point of each flap by scrolling the touch
sensor.
point offset
*When the RTN button is touched for one second, the
reference point is reset to the initial value.)
and return to the cursor mode.
the RTN button to switch to the data input
touch sensor.
*The display blinks.
Touch the RTN button to activate the
To select a switch, move the cursor to the
the selection screen. Select the switch and
*For a description of the switch selection method, see the
description at the back of this manual.
<Model Menu (Airplane/Glider Functions)>
FLP 4
FLP 3
(Brake Flap)
(Brake Flap)
FLP 1
FLP 2
(Camber Flap)
(Camber Flap)
*The display screen is an example. The actual
screen depends on the model type.
<SensorTouch™>
Scrolling
(Glider: Currently selected condition name)
121