CMBFLP to ELE
When the camber/speed flaps are utilized,
the aircraft might experience, a change in pitch.
This mix compensates for such changes by
incorporating elevator input.
access the setup screen shown below by touching
the RTN button.
and return to the Model
menu by touching the
R T N b u t t o n . O r t h e
H O M E / E X I T b u t t o n i s
pushed.
RETURN
Setting method
the RTN button to switch to the data input
touch sensor.
*The display blinks.
Touch the RTN button to activate the
When setting a switch, move the cursor to
call the selection screen. Select the switch
*For a description of the switch selection method, see the
description at the back of this manual.
130
<Model Menu (Airplane/Glider Functions)>
FLP 1
(Camber Flap)
V-TAIL
ELEVATOR
ELEVATOR 2
(Glider: Currently selected condition name)
<SensorTouch™>
* T h e d i s p l a y s c r e e n i s a n
example. The actual screen
depends on the model type.
and touch the RTN button to switch to the
independently by scrolling the touch sensor.
*When the RTN button is touched for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
FLP 2
(Camber Flap)
AILVATOR
ELEVATOR
ELEVATOR 2
Scrolling