Normal Throttle Curve Adjustment Method; Idle Up 1/2 Throttle Curve Adjustment Method; Thr Crv - FUTABA T6K-V2 Instruction Manual

THR CRV

Function
The throttle curve function sets a 5 point curve in
relation to the throttle stick movement and adjusts
each point over the 0-100% range so that the engine
（Normal throttle curve adjustment method）
The normal throttle curve creates a basic throttle curve centered near hovering. This curve is
adjusted together with the normal pitch curve so that engine speed is constant and up/down
control is easiest. The normal throttle function is always on.
（Idle up 1/2 throttle curve adjustment method）
The idle up curves are set so that the engine maintains a constant speed even when the pitch is
reduced during flight. Curves matched to the purpose such as loop, roll and 3D are created and idle
up curves 1/2 are by aerobatics.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
Activating the function
Setting condition
5 point curve
● Select the setting item
with the Jog key.
132
Throttle curve
CAUTION
Operation precautions
When starting the engine, always set idle up sticks 1/2 to OFF and start the
engine at idling.
② Select
（1 second）
rate
"THR CRV"
from the menu with the
Jog key.
（Rate） （Present condition）
(HELICOPTER)
③ Open the setting screen by
pressing the Jog key.
● When not using this Function
select INH. The display of On/
Off is shown when active and
assigned to a switch. A display
when normal is "---" （always
ON） .
● The THR-CURVE settings are
displayed by a curve.