Siemens SIMATIC ET 200SP Manual page 34

Drivers, parameters, diagnostics messages and address space
A.2 Parameter assignment
Error_ Error_ Cause
Code_ Code_
1 2
0xE1 0x01 Reserved bit set
0xE1 0x02 Invalid diagnostics enable bit set for operating mode
0xE1 0x03 Invalid hardware interrupt enable bit set for operating
mode
0xE1 0x07 Invalid coding for input delay
0xE1 0x0B Invalid coding for pulse stretching
0xE1 0x0E Invalid redundancy parameter assignment
34
Remedy
Check and correct the parameters
Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)
Manual, 05/2017, A5E39265608-AA