Function Introduction For Combination Buttons - Gree GPAC12D Owner's Manual

Introduction for buttons on remote controller
hour. When holding "+" or "-" button, for 2 seconds, the time will change quickly until to
Cancel TIMER OFF: Press "TIMER" button again under TIMER OFF status.
● At OFF status, press this button once can set TIMER ON. Please refer to TIMER
off for detailed operation.
Cancel TIMER ON: Press "TIMER" button again under TIMER ON status.
Note:
● Time setting range: 0.5-24 hours.
● Time interval between two operations can't exceed 5 seconds. Otherwise, remote
controller will exit the setting status automatically.
11
TURBO button
When pressing this button under cooling or heating mode, air conditioner will enter
into quick cooling or quick heating mode. The character of "TURBO" is displayed
on remote controller. Press this button again to exit turbo function and the character
of "TURBO" will be disappeared on remote controller.
12
SLEEP button
Press this button under cooling, heating mode can start up sleep function.
" " icon will be displayed on remote controller. Press this button again to cancel
sleep function. "
13
LIGHT button
Press this button can turn off the light for the unit's display. "
controller will disappear. Press this button again to turn on the light for the unit's
display. " " icon on remote controller will be displayed.

Function introduction for combination buttons

Child lock function
Press "+" and "-" buttons simultaneously can turn on or turn off child lock function.
When child lock function is started up, "
controller will not send signal.
Switchover function for temperature display
After turning off the unit by remote controller, press "-" button and "MODE" button
simultaneously to switch between ℃ and °F .
(Not applicable for this unit)
"icon on remote controller will be disappeared.
" icon will be displayed on remote
12
" icon on remote