Tally Dascom 7106Series Programmer's Manual page 43

Rewriting specified format register contents
Code
[02] U nnaa..
Setting
nn 2-digit format register numbers 01 - 99
aa Input character string data ending with CR code (0D hex) instead
Function
Changes some part of the formerly printed label format or formatted
label contents and prints it again.
Example
Input data below represents that data "0001" and "ABC" are set on the
fields No. 01 and No. 02 respectively and label is printed and then with
this command, the data contents of the fields No. 01 and No. 02 are
changed to "9999" and "GHIJK" and printed.
Input data
[02] n
[02] L
D11
1611000000000500001
161100000300050ABCDE
E
[02] U019999
[02] U02GHIJK
[02] G
Direction of feed
Printer sets format register numbers in sequence when label
format is executed.
of old data. Basically the number of characters must be the same
as the old data. But if it is small, rewriting can be executed.
GHIJK
9999
ABCDE
0001
Sets units to inch
Starts label format mode
Sets pixel size
Sets data "0001" on fields No. 01
Sets data "ABCDE" on fields No. 02
Ends label format mode and prints
Changes data on fields No. 01 to "9999"
Changes data on fields No. 02 to
"GHIJK"
Prints edited format
1-41