Tally Dascom 7106Series Programmer's Manual page 25

Figure
Cutter
Note: Peeler option is not available for CLP-8301
Printing edited or formerly-printed format
Code
[02] G
Function
Prints label data for former printing or formatting.
Caution
This command is effective only when label data for former printing or
formatting is left in the internal memory. If power i s turned off or reset
is performed, data in the internal memory will be cleared, so this
command will not be effective.
Example
Input data below represents that after ending label format printing data
"ABC" one sheet, printing for the same data is executed again with
this command [02] G.
Input data
[02] n
[02] L
D22
190001001000050ABC
E
[02] G
Peeler
Ejection
Print head
Paper sensor
Sets units to inch system
Starts label format mode
Sets pixel size
Sets character data "ABC" with smooth
font 48pt
Ends label format mode and prints
Executes 1-sheet printing for edited
format
1-23
A
B
C