Report Printer (Option); Replacing The Print Paper; Replacing The Ribbon Cartridge - Miele PG 8527 Operating And Installation Instructions

Report printer (Option)

Replacing the print paper

When the red indicator light on the front
panel of the printer lights, the print
paper needs to be replaced.
^ Open the front panel of the printer by
the upper edge, and pull down.
^ Remove the paper roll and spindle
together from the holder, fit the new
roll onto the spindle, and install them
back into the printer.
^ Guide the paper up and over the
paper transport roller (slit behind the
ribbon cartridge). Press the green
paper transport button until the paper
re-emerges above the ribbon
cartridge.
^ Guide the paper through the slit in
the front panel. Shut the panel.
Replacement paper rolls (2 1/4" (58mm)
wide / outer diameter approx. 2"
(50mm) can be obtained from Miele.

Replacing the ribbon cartridge

^ Open the front panel of the printer by
the upper edge, and pull down.
^ The ribbon cartridge is above the
paper roll. Pull it forward and out of
the holder and replace it with a new
one. The paper must be guided
between the ribbon and the cartridge
housing.
^ On the right, turn the small wheel for
manual ribbon transport clockwise
until the ribbon is taut.
^ Guide the paper through the slit in
the front panel. Shut the panel.
Replacement ribbon cartridges can be
obtained from Miele.
Maintenance
45