Maintenance - Miele PG 8527 Operating And Installation Instructions

Maintenance

Labwashers should undergo routine
maintenance by the Miele Technical
Service every 1000 operating hours
or at least once every 6 months.
Maintenance covers the following:
– electrical safety
– Door mechanism and door seal
– Screws and connections in the wash
cabinet
– Water inlet and drain
– Internal and external dispensing
systems
– Spray arms
– Triple filter system
– Drain pump and non-return valve
– Steam condensor
– All mobile units, baskets, and inserts
If applicable:
– Drying unit
– Connected printer
38
Also during maintenance, the following
function checks are conducted:
– a test program is run
– wash temperatures are measured
– ensure a water tight door seal
– all safety-relevant measuring
systems are checked (fault display).