Important Safety Instructions - Miele PG 8527 Operating And Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

This machine conforms to current
safety requirements. However,
inappropriate use can lead to
personal injury and property
damage. Read the operating
instructions carefully before using
this machine.
The manufacturer cannot be held
responsible for damage caused by
non-observance of these Important
Safety Instructions.
Use
~
This machine is designed for
commercial use and for specialized
applications only, as described in these
Operating Instructions. Do not use for
purposes other than those for which it
was designed, as this could be
dangerous. Miele is not responsible for
damages caused by improper use.
~
The installation of this unit in non
stationary locations (e.g. ships) must be
performed by a qualified installer or
service agency in strict accordance
with national and local safety
regulations and standards.
4
Please pay attention to the following
notes to maintain safe procedures.
~
The machine should be
commissioned and maintained only by
a Miele Service Technician. Repairs by
unqualified persons could be
dangerous.
~
Do not install the machine in an area
where a danger of explosion or freezing
may be present.
~
Be certain this appliance is properly
installed and grounded by an
authorized technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system
checked by a qualified technician. The
manufacturer cannot be held
responsible for damage or injury
caused by the lack, or inadequacy, of
an effective grounding system
(e.g. electric shock).
~
A damaged machine is dangerous.
Turn off the machine immediately at the
power switch and call the Miele Service
Department.
~
Personnel operating the machine
should be trained regularly. Children
and untrained personnel must not be
allowed access to the machine or its
controls.