System Configuration Screen Parameters - biodex 950-401 Application/Operation Manual

System Configuration Screen Parameters

Test Completion Screen TimeOut: This setting determines how long the Test Results screen will
be displayed before the screen saver activates following completion of the exercise session.
The default is "OFF" but the range can be adjusted from 0:15 seconds to 60:00 minutes. Touch
the <▲> and <▼> icons to increase or decrease the value.
Screen Configuration: The Screen Saver setting determines how long the display screen remains
ON when the system is no longer in use. Once the selected time expires, the screen fades to
black even if the Gait Trainer remains ON. To enable the Screen Saver function, touch the radio
box next to <Enable Screen Saver> causing it to turn green. Use the <▲> and <▼> icons to
increase or decrease the value displayed in 1 minute increments. The "time out" range is from
00:00 to 50:00. To enable a mirror image of the display on an external monitor, touch <Mirror
to External Monitor> (An external monitor must already be connected to the VGA port on the
bottom of the display.) Touch <OK> to confirm the changes and return to the Configuration
screen. Touch <Cancel> to return to the Configuration screen without making any changes.
Figure 8.5. Screen Configuration Screen
Set Date/Time: Touch <Set Date/Time> to change the system time, date, or time zone. Touch
the button to highlight the value to change and use the <▲> and <▼> icons to increase or
decrease the value as desired. To change the Time Zone, touch the drop-down menu once and
scroll through the list to make a selection. Touch <OK> to save the changes and return to the
Configuration screen.
Biodex Medical Systems, Inc. © 2017
58